Exceptional Multi-gas Performance
Compact and robust 1-to-6 gas design
3-year warranty on O2, LEL, H2S,
CO and COSH sensors
reading sensors for CO2, NH3,
NO, PH3, HF, O3
and PID for VOC measurement
motorized pump operates in diffusion or sample-draw mode
water resistant (IP 67)
back-lit, three color graphic display
flashing 360° LED alarms and loud 103 dB buzzer
built-in "flash light" LEDs
and datalogging standard
and rugged design
G460 continuously measures and displays readings for up to six gases
at the same time. The robust and watertight (IP 67) housing
incorporates a built-in concussion proof boot to survive the toughest
A single on-off
button is all it takes for normal day-to-day operation. A simple
three button interface provides access to advanced setup options.
Calibration adjustment is completely automatic; just attach the
calibration adapter and
apply gas. The instrument automatically makes adjustments and retains
the three most recent calibration dates for each sensor..
Widest range of sensors
are available for use with a wide range of longlasting, interchangeable
smart-sensors for LEL, O2, H2S, CO, NH3, SO2, CI2, PH3, NO2, HCN,
ETO, ClO2, HF, O3, NO and H2. Infrared (NDIR) sensors for the direct
measurement of CO2, and photoionization detectors (PID) for the
measurement of volatile organic chemical (VOC) hazards are also
pump includes a built-in slide-shutter switch that permits
operation in either diffusion or sampledraw mode while the pump
is attached. The easily attachable pump is powered by its own battery
pack that provides 20 hours of continuous sampling from up to 100
The G460 carries
a lifetime warranty on nonconsumable components and a two-year warranty
on consumable components. O2, LEL, H2S, CO and COSH sensors carry
a full three-year warranty against failure.
/ event loggingstandard
The G460 automatically
stores complete results for the most recent 55 hours of monitoring.
Any periods during which readings exceed the alarm thresholds are
stored as events in the permanent on-board memory. Downloading
logged information to generate reports and graphs of your monitoring
results is easy and automatic with a simple to use data transfer
easy-to-read displays and alarms
The large, easy-to-read,
three-color display changes color to indicate the severity of the
alarm; the backlight color changes from from green for "OK"
to orange or red for an alarm. The loud audible alarm (103 dB at
12"), built-in vibrator and bright 360° LED alarm indicators
alert users to hazardous conditions. The backlit display can be
"flipped" 180° or "zoomed" at the push of
a button for even easier reading.
The large, high
resolution topmounted display can be flipped 180o by pressing two
buttons, allowing measurements to be easily read while the detector
is being worn on a belt, pocket or lapel.
alkaline and rechargeable (NiMH) battery packs provide up to 25
hours of continuous operation. The drop-in cradle charger fully
charges a depleted battery pack in less than 4 hours. The cradle
includes LEDs to indicate fast charge / trickle charge status.
"flash light" LEDs
can be equipped with built-in high intensity "flash light"